The BKS1S system is especially suited to monitor two tools.


Features:

  - Absolutely leak proof under severe working conditions
  - Sensor diameter 32mm (1.26")
  - Scanning clockwise (cw) and/or counter clockwise (ccw)
  - Discrete input signals for cw and ccw scanning
    two tools may be checked successively or individually
  - Object or free space scanning
  - PNP and NPN outputs,
    solid state, wear resisting, short protected
  - Inverting output signals via Dip switch
  - Test result is available at the outputs until a new test cycle
     is started

Note Worthy:

  - Double sealed
  - Position and rpm controlled drive for feather light tool contacts
  - The fixed home position is reached immediately after powering the unit
     No need for a teach or test cycle
  - Separate or combined checking of two tools
  - No mechanical stop in scanning range


Technical Data Sensor BKS1:

Protection:	IP68
Housing:	Aluminum anodized
Working life:	typically 10 Million cycles
Scanning angle:	15...270°, cw and/or ccw, combined up to 360°
Probe lengths:	160mm with brass end (included with sensor)
	100mm, 160mm, 200mm with carbide end as accessories
	100mm, 160mm, 200mm with brass end as accessories
Electrical connector:	Sensor receptacle M12, 5-pins
Ambient temperature:	0...80°C
Storage temperature:	-15...80°C
Interference susceptibility:	Exceeding current standards sometimes by large factors

Technical Data Controller BKS1S and BKS1:
 

Protection:	IP20
Housing:	Plastic
Mounting:	Din rail
Supply voltage:	24VDC, +/-5%
Signal inputs:	24V
Signal outputs:	24V, short protected, PNP, NPN
Terminals:	Screw terminal, plug-in type
Ambient temperature:	0...50°C
Storage temperature:	-15...80°C
Interference susceptibility:	Exceeding current standards sometimes by large factors

Order Details BKS1S:
 

Description	Type	Order #.	Note
Controller	BKS1S	9109	compatible with BKS1
Controller	BKS1	9100	no longer manufactured
Sensor	BKS1	9101	including probe assembly 160mm
Cable BKS1,   5m, straight connector		9102	for both controllers BKS1(S)
Cable BKS1, 10m, straight connector		9103	for both controllers BKS1(S)
Cable BKS1, 20m, straight connector		9104	for both controllers BKS1(S)
Cable BKS1S, 10m, straight connector		9118	for controller BKS1S only
Cable BKS1S, 20m, straight connector		9119	for controller BKS1S only
Probe assembly 160mm, brass end		9072
Probe only 160mm, brass end		9422	for delicate tools
Probe only 160mm, carbide end		9106	old item number 9412
Mounting bracket for sensor		9107

 

 BKS1S